Shedrow Event Stall Systems

A very affordable covered stall system!
Shedrow Event Stalls

Shedrow Event Stall SystemShedrow Event Stall System

The Noble Shedrow Event Stall System is ideal for daily rentals at fairgrounds and public event centers. The simple and economical design also makes our Shedrow Systems perfect for equine breeding or boarding facilities. Facilities requiring more stall space can benefit from this system, as it offers the most stall space using the least amount of acreage.

Our Shedrow System utilizes a sequence of 12x12 Event Stalls in a side-by-side and back-to-back layout. The back of each stall measures 10' high and is solid to the 8' high mark. Divide walls are sloped from 10' high down to 8' high and are also solid to 8'. Event Stall Fronts are used on both sides of the unit for entrance into the stall. Sold as a frame-only kit (does not include wood). Roof Metal Kits available upon request (sold separately). Noble Shedrows must be anchored (included in this system).

Standard sizes available in configurations from four stalls (24' x 24') up to twenty stalls (24' x 120') in two-stall increments. Longer rows with more than twenty stalls may be ordered.

Row of 4 Shedrow Event Stalls

We use a heavy 15 gauge Round Galvanized Steel Tube to manufacture our Shedrow Systems. The 1 7/8" diameter material we fabricate with is milled to our specifications, and is made right here in the USA. We chose this material for it's superior strength and longevity. A round tube is stronger than a square or rectangular tube of equal weight and size. When properly erected and anchored, our Shedrow Event Stall Systems are engineered to withstand a 55lb. per square foot snow load and a 90 mph wind. Like all Noble products, our Shedrow Systems have a galvanized finish for unequalled rust protection.

Noble Shedrow Event Stall Systems are fabricated to accept 3/4" plywood of any grade. A unique plywood mounting channel is used to secure each piece of wood in place. The plywood is cut to size (as per cut diagram) and is mounted against the mounting channel with a T-Nut and Machine Screw (supplied in each installation kit). This design allows each sheet of wood to be recessed inside the wall panel.

Row of 4 Shedrow Event Stalls

Noble Shedrow Event Stall Systems are quick and easy to erect. They come with a set of easy to read instructions, plywood cut diagrams and all hardware needed to assemble (less wood and roof material). Our Shedrow Systems must be anchored with our Concrete Anchor Kit (included). A Roof Metal Kit may be ordered (sold seperately).

Our Shedrow Systems are expandable. With our modular design you may add additional sections (in two-stall increments) to any existing Noble Shedrow Event Stall System.

Shedrow Event Stalls - Side View
Shedrow Event Stalls - Front View