Noble Horse Fencing Panels

Noble Panels are the safest, longest lasting Panels on the Market...period.

Noble Panels can be used as portable or permanent fencing. Using our safe and strong clamp system for panel attachment, you can erect a Round Pen, Arena, or Paddock quickly. Our panels can also be erected with our unique steel post support system for a more permanent fence.
Noble Panels & Gates are offered in a variety of heights, lengths, and number of rails. They are available in any length up to 20' and in heights ranging from 4' to 6' in six inch increments. 5 and 6 rail panels have 8 ½" spacing between rails. 3 and 4 rail panels have 12 ½" spacing between rails. All panels and gates are built in both 1 5/8" and 1 7/8" diameter tube.
Noble products are appealing, safe, easy to install and extremely long lasting. All of this at an affordable price, equals a great value for your dollar!
![]() ![]() 8 1/2" between
rails, bottom rail 19 1/2" off ground Ideal for Stallion Paddocks, containing & working wild horses, also great Round Pen Panel.
|
![]() ![]() 8 1/2" between
rails, bottom rail 13 1/2" off ground Most versatile, do-it-all panel. Ideal for mare/foal Paddocks and containing & working cattle.
|
![]() ![]() 8 1/2" between
rails, bottom rail 17 3/4" off ground Our #1 selling Horse Panel & best selling Round Pen Panel. Used for roping arenas, round pens, paddock runs, and perimeter fencing.
|
![]() ![]() 12 1/2" between
rails, bottom rail 16" off ground Ideal for large fenced pastures and pleasure arenas.
|
![]() ![]() 12 1/2" between
rails, bottom rail 24" off ground Lightweight economical panel.
|
We invite you to compare the following features with any panel and
gate on the market. We are confident you will agree that
are the "Ultimate in Livestock Fencing".

CAPS: All panels are capped along the top rail. All
gates are capped on top and bottom rail. Our weldon
caps prevent injury and enhance appearance.
CORNERS: Top corners are squared,
not rounded or curved. This eliminates
the chance that livestock may hang a
leg in between panels where they are
joined.
JOINTS: Joints are
notched and welded
all the way around for
maximum strength
and a smooth finish.
This process eliminates
moisture from
penetrating rails and
causing damage.
UPRIGHTS: Vertical uprights are built out of the
same material as the rails - each upright goes clear
to the ground for SUPERIOR SUPPORT. Uprights
are spaced evenly throughout the panel, never going
over 6' without a vertical upright.
CLAMPS: Panels are attached together with a galvanized
panel clamp assembly that is included in the price of each
panel. This system leaves only a 3/8" gap between panels.
The rigidity of this clamp system also will not allow panels
to move and rattle or clang when in use like a pin attachment
or chain attachment system.
MATERIAL: Constructed of
15 gauge American-Made 1
- 5/8" OD round galvanized
steel tubing. Tubing has a
.072 wall thickness and a
65,000 lb yield strength. The
rust-resistant finish will provide
decades of use and retain
its decorative silver appearance.
1 - 7/8" OD 15 gauge material available on special request.
1 - 7/8" OD 15 gauge material available on special request.