Event Stall Fronts & Dividers

Economical Horse Stall Solution for Your Horse Needs

Economical solution to stalling needs

Noble Event Stalls are a high quality stall system at a very affordable price. Event Stalls are made with a heavy duty 1 7/8" OD round galvanized steel tube. They have horizontal bars set 7" apart instead of vertical grills. Event Stalls are designed to accept plywood (not included). The wood will mount into the wall against a flat metal flange with T-Nut and Screw (included), leaving no exposed wood edges for a horse to chew on. Event Fronts and Dividers are available in standard lengths of 10' and 12', but can be special ordered in custom lengths.
Event Stall Systems

Event Stall SystemsEvent Stall Systems

Noble Event Stalls offer a strong, high quality stall system at a very affordable price. Ideal for fairgrounds and public event centers as well as private boarding facilities. Noble Event Stalls can be custom sized to fit any barn layout dimensions.

Event Stall Fronts can be custom ordered with a forklift rail opening at the top of each wall for ease of set-up and tear-down.
Full Width Grilled Divider
Optional Event Front Feed Door

Event Stall FrontsEvent Stall Fronts

Noble Event Stall Fronts are built to accept a plywood insert (wood not included). They are available in standard lengths of 10' and 12'. Finished height is 8'. Custom lengths and heights may be ordered. The door of this stall front can swing in or out and offers a 4' 3" wide entrance. The door can be ordered on the right or left and is operated with our Horseshoe Latch. Optional Event Front Feed Door may be added.
Event Divider Solid Plywood

Event Stall Solid DividerEvent Stall Solid Divider

Standard lengths are 10' and 12' with a height of 8'. Custom lengths and widths may be ordered.

This Solid Divider is designed for use with 3/4" or 1" plywood (not included). The wood is inset between the uprights of the framework, leaving no exposed wood edges.
Solid Divider with Tongue & Groove Inserts

Solid Divider with Tongue & Groove InsertsSolid Divider with Tongue & Groove Inserts

Standard lengths are 10' and 12' with a height of 8'. Custom lengths and widths may be ordered.

This 1/2 Solid Divider is designed for use with 3/4" or 1" plywood (not included). The wood is inset between the uprights of the framework, leaving no exposed wood edges.